index sitemap advanced
   
view previous page
 
print page
 

Our Most Popular Page Links

 
   
 
   
 
   
 
   
   
   
   
   
   
   
   
 
Skyline Box Hipped Skylight Skyline Box Hipped Skylight Skyline Hipped Skylight Skyline Hipped Skylight
Skyline Gable Ended Skylight
Skyline Box Polygonal Skylight
Heritage Hipped Skylight
Heritage Hipped Skylight

Our self supporting Skyline and Skyline Box Skylights incorporate structural aluminium ridge/hip and cill members and are secured to a suitably flashed flat topped structural upstand curb.
The finished curb must be supplied at least 100mm wide to accommodate our cill member. We manufacture to any size from 1500mm to 6000mm in width and the skylights can be supplied in any length required.

Our pivoted cill member is designed to allow the skylight to be pitched at any angle starting at 15° up to a maximum of 45° and our standard pitches are available at increments of 5° within the range. Pitches exceeding 45° can still be supplied, but will require a modified cill member for this to be achieved.
Our aluminium skylights are available in our Skyline and Skyline Box glazing systems and can be supplied in double glazed and single glazed options. On larger skylights we install stainless steel tension wires at the curb positions at approximately three metre intervals along the ridge line to prevent the horizontal loadings being transferred to the builders curb.

All our Skylights are fully assembled in our factory during manufacture to ensure a perfect fit with no site cutting necessary.

Our self supporting Heritage hipped skylights are ideal as a replacement product for existing skylights on listed or historic buildings where a sympathetic replacement is a requirement. Our Heritage lead covered steel glazing bars are combined to great effect with matching polyester powder coated structural aluminium ridge, hip and cill members. Neatly dressed Code 4 lead flashings are also supplied externally to create the weathering at the ridge and hip positions.

These skylights can also be provided with glazed vertical upstand frames and are available in bespoke designs to suit existing curb patterns. The curb must be supplied at least 75mm wide to accommodate our cill member. We manufacture to any size with a general maximum curb width of 4000mm and the skylights can be supplied in any length required.

The skylight can be supplied in both double glazed and single glazed formats and also at any pitch starting at 15° up to a maximum of 60°.