Electric Gearing

Chain actuators of the ACK4 series remain our first choice for most of our contracts based on pleasing aesthetics and an impressive proven history of this device.

The electronic chain position control allows seven stroke-end positions, easily adjustable at any moment.
The actuators can be controlled by a standard on/off switch or a more advanced system which incorporates a control panel with seperate thermostatic control and rain sensor.

The wiring of the system is excluded from our package, as this should be carried out by a qualified Electrician.

The actuator outside protection, made of aluminium alloy, is die-cast and is coated by epoxy powders (standard colours: dull black, RAL 9010 white, RAL 9006 metallized grey).
The electric parts are built with double insulation (therefore earth wire not necessary) and contained in a body of plastic material to ensure a high protection level. On the chain-end (completely made of STAINLESS steel) it is possible to effect a 10 mm adjustment.

Specifications
The ACK4 model, with stainless steel double-link sprocket chain, contained in a specially provided covering of die-cast aluminium and coated by epoxy powders, equiped with supports and accessories for top hinged and bottom hinged windows. Voltage supply at 230V ~ 50Hz or 24V c.c., thrust and traction force 350N, maximum stroke 40 cm, with possibility of adjustment every 5 cm, from 10 to 40 cm. Electronic stroke-end with regulation by means of a grip situated on both sides of the actuator. CE homologated device complying with the CEE EN 60335-1, 89/336 CEE (electromagnetic compatibility) regulations.

Technical data	ACK42	ACK44
Voltage supply	230V ~ 50 Hz	24V c.c.
Thrust force	300 N	300 N
Traction force	300 N	300 N
Stroke-end adjustable at	10-15-20-25-30-35-40 cm
Absorbed current	0,260 A	2,10 A
Loadless translation speed	28 mm/s	18 mm/s
Idle stroke duration	14 s	22 s
Double electrical insulation	YES	LOW VOLTAGE
Service	S2 di 3 min	S2 di 3 min
Working temperature	-10 +65 °C

Electrical devices’ protection class	IP55
Regulation of attachment to window casing	10 mm
Connection of two or more actuators in parallel	YES
Patented chain position control	YES

Electrically Controlled Gearing

Our Technical department is always available to answer your queries and to offer our expert advice
The Standard Patent Glazing Co. Ltd Flagship House, Forge Lane, Dewsbury, West Yorkshire, WF12 9EL
Tel 01924 461213 Fax 01924 458083 mail enquiries@patent-glazing.com www.patent-glazing.com